Nginx and PHP-FastCGI on Debian 5 (Lenny)

Select distribution:
Traducciones al Español
Estamos traduciendo nuestros guías y tutoriales al Español. Es posible que usted esté viendo una traducción generada automáticamente. Estamos trabajando con traductores profesionales para verificar las traducciones de nuestro sitio web. Este proyecto es un trabajo en curso.
Deprecated

This guide has been deprecated and is no longer being maintained.

Create a Linode account to try this guide with a $ credit.
This credit will be applied to any valid services used during your first  days.

The nginx web server is a fast, lightweight server designed to efficiently handle the needs of both low and high traffic websites. Although commonly used to serve static content, it’s quite capable of handling dynamic pages as well. This guide will help you get nginx up and running with PHP and FastCGI.

It is assumed that you’ve already followed the steps outlined in our Setting Up and Securing a Compute Instance. These steps should be performed via a root login to your Linode over SSH.

Set the Hostname

Before you begin installing and configuring the components described in this guide, please make sure you’ve followed our instructions for setting your hostname. Issue the following commands to make sure it is set properly:

hostname
hostname -f

The first command should show your short hostname, and the second should show your fully qualified domain name (FQDN).

Install Required Packages

Issue the following commands to update your system and install the nginx web server, PHP, and compiler tools:

apt-get update
apt-get upgrade
apt-get install nginx php5-cli php5-cgi build-essential wget psmisc
/etc/init.d/nginx start

Various additional dependency packages will be installed along with the ones we requested. Once the installation process finishes, you may wish to make sure nginx is running by browsing to your Linode’s IP address (found on the Networking tab in the Linode Cloud Manager). You should get the default NGINX page.

Configure Your Site

In this guide, we’ll be using the domain “example.com” as our example site. You should substitute your own domain name in the configuration steps that follow. First, we’ll need to create directories to hold our content and log files:

mkdir -p /srv/www/www.example.com/public_html
mkdir /srv/www/www.example.com/logs
chown -R www-data:www-data /srv/www/www.example.com

Next, define your site’s virtual host file:

File: /etc/nginx/sites-available/www.example.com
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
server {
    server_name www.example.com example.com;
    access_log /srv/www/www.example.com/logs/access.log;
    error_log /srv/www/www.example.com/logs/error.log;
    root /srv/www/www.example.com/public_html;

    location / {
        index index.html index.htm index.php;
    }

    location ~ \.php$ {
        include /etc/nginx/fastcgi_params;
        fastcgi_pass  127.0.0.1:9000;
        fastcgi_index index.php;
        fastcgi_param SCRIPT_FILENAME /srv/www/www.example.com/public_html$fastcgi_script_name;
    }
}

Important security note: If you’re planning to run applications that support file uploads (images, for example), the above configuration may expose you to a security risk by allowing arbitrary code execution. The short explanation for this behavior is that a properly crafted URI which ends in “.php”, in combination with a malicious image file that actually contains valid PHP, can result in the image being processed as PHP. For more information on the specifics of this behavior, you may wish to review the information provided on Neal Poole’s blog.

To mitigate this issue, you may wish to modify your configuration to include a try_files directive. Please note that this fix requires nginx and the php-fcgi workers to reside on the same server.

File: /etc/nginx/sites-available/www.example.com
1
2
3
4
5
6
7
location ~ \.php$ {
    try_files $uri =404;
    include /etc/nginx/fastcgi_params;
    fastcgi_pass 127.0.0.1:9000;
    fastcgi_index index.php;
    fastcgi_param SCRIPT_FILENAME /srv/www/www.example.com/public_html$fastcgi_script_name;
}

Additionally, it’s a good idea to secure any upload directories your applications may use. The following configuration excerpt demonstrates securing an “/images” directory.

File: /etc/nginx/sites-available/www.example.com
1
2
3
4
5
6
7
8
location ~ \.php$ {
    include /etc/nginx/fastcgi_params;
    if ($uri !~ "^/images/") {
    fastcgi_pass 127.0.0.1:9000;
    }
    fastcgi_index index.php;
    fastcgi_param SCRIPT_FILENAME /srv/www/www.example.com/public_html$fastcgi_script_name;
}

After reviewing your configuration for potential security issues, issue the following commands to enable the site:

cd /etc/nginx/sites-enabled/
ln -s /etc/nginx/sites-available/www.example.com
/etc/init.d/nginx restart

You may wish to create a test HTML page under /srv/www/www.example.com/public_html/ and view it in your browser to verify that nginx is properly serving your site (PHP will not work yet). Please note that this will require an entry in DNS pointing your domain name to your Linode’s IP address.

Install spawn-fcgi

Visit the spawn-fcgi project page and locate the download link to the latest version. Issue the following commands, substituting your link for the one shown below if a newer version is available.

cd /opt
wget http://www.lighttpd.net/download/spawn-fcgi-1.6.3.tar.gz
tar -xf spawn*
cd spawn*
./configure
make
cp src/spawn-fcgi /usr/bin/spawn-fcgi

Issue the following command sequence to download scripts to control spawn-fcgi and php-fastcgi, set privileges, make the init script run at startup, and launch it for the first time:

cd /opt
wget -O php-fastcgi-deb.sh http://www.linode.com/docs/assets/680-php-fastcgi-deb.sh
mv php-fastcgi-deb.sh /usr/bin/php-fastcgi
chmod +x /usr/bin/php-fastcgi
wget -O php-fastcgi-init-deb.sh http://www.linode.com/docs/assets/681-php-fastcgi-init-deb.sh
mv php-fastcgi-init-deb.sh /etc/init.d/php-fastcgi
chmod +x /etc/init.d/php-fastcgi
update-rc.d php-fastcgi defaults
/etc/init.d/php-fastcgi start

Test PHP with FastCGI

Create a file called “test.php” in your site’s “public_html” directory with the following contents:

File: /srv/www/www.example.com/public\\_html/test.php
1
<?php echo phpinfo(); ?>

When you visit http://www.example.com/test.php in your browser, the standard “PHP info” output is shown. Congratulations, you’ve configured the nginx web server to use PHP-FastCGI for dynamic content!

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

This page was originally published on


Your Feedback Is Important

Let us know if this guide was helpful to you.


Join the conversation.
Read other comments or post your own below. Comments must be respectful, constructive, and relevant to the topic of the guide. Do not post external links or advertisements. Before posting, consider if your comment would be better addressed by contacting our Support team or asking on our Community Site.
The Disqus commenting system for Linode Docs requires the acceptance of Functional Cookies, which allow us to analyze site usage so we can measure and improve performance. To view and create comments for this article, please update your Cookie Preferences on this website and refresh this web page. Please note: You must have JavaScript enabled in your browser.